J's Racing's Type V Aerobonnet Carbon/FRP Hood 2017-2021 Honda Civic Type R Fk8/Fk7

Part Number: 

JS-ABV-K8-C Carbon / FRP

JS-ABV-K8-F FRP

 Special Order

Actual shipping rates will be applied after purchase and contacted by our team for non-picked up items. Estimated during checkout.

Vehicle Applications:

2017+ Civic Type R (FK8)

Lighter weight and cooling effect increase the potential of the Type R!

・In order to actively incorporate intake air into the air cleaner, the intake part is designed with an increased volume.

・The V-shaped ducts and main ducts that provide heat generated from the high-output K20C engine and turbine on the left and right sides generate negative pressure, enabling highly efficient heat exhaustion. The exhaust heat effect from the total duct area of about 150 cm2 brings out 100% of the potential of the engine by lowering not only the water temperature and oil temperature, but also the intake air temperature, and suppresses heat dripping and high water temperature correction programs due to sports driving as well as on the street.

・In a comparative test with the stock bonnet conducted at the Suzuka International Racing Course, the water temperature was up to -15°C and the average cooling effect was -10°C. Also. Even without a bonnet pin, it has been confirmed that it can withstand high speeds of more than 220 km. * Test vehicle: Boost 1.8kgf/cm²/365ps, temperature 30°C, no rain protection.

・Further cornering performance is achieved by reducing the weight of the stock bonnet to 6.8kg compared to 9.7kg.

The full carbon specification is a single piece of carbon cloth pasted on the front and back with the skills of skillful craftsmen, resulting in a high-quality finish. Since it is compatible with the genuine bonnet catch, it can be installed with a bolt-on even if there is no bonnet pin!

The cooling aerobonnet, which is indispensable for the FK8, which has a weak point of large heat damage, is completed!

Since it is compatible with the genuine bonnet catch, it can be installed with a bolt-on even if there is no bonnet pin!


*The image is made of carbon FRP. The back of this product is also finished in carbon.*

Js Racing